新2会员管理 - (中国)网站登陆

BIUGED INSTRUMENTS offers a wide range of drawdown cards and charts for virtually any application and coating material. Stringent equality control during the production process assures that they have the most consistent color and gloss in the industry. Test charts are easy to use and an economical substrate to test a variety of coating properties, such as opacity, spreading rate, and flow& leveling behavior. They are used for testing architectural, industrial, automotive, wood finishes or even cosmetic products（e.g. nail polish）.Depending on the material properties of the product to be tested and its usage different types of drawdown cards are available.

Selection of test charts dependent on coating technology

Depending on the types of solvent used in paint formulations a drawdown chart needs to be more or less solvent resistant. The resin type requires different solvent types and dependent on the polarity of the solvent, the organic ingredients will be more or less activated. Therefore, BIUGED offers two types of drawdown cards and charts.

① Clear-coated Charts

◆ Are ideal for a wide range of coating systems: water and solvent borne technologies

◆ Guaranteed non-fluorescent paper in compliance with ASTM D 344

◆ Repeatable color and gloss-lot after lot

◆ Superior adhesion characteristics, especially with latex paints

◆ Rugged design（ 0.5 mm thickness）to prevent warping and bending after the coating is applied.

◆ Package is shrink-wrapped with low permeability plastic to prevent moisture absorption during shipping and storage.

② Film Laminated Charts

◆ With excellent solvent resistance

◆ Repeatable color and gloss-lot after lot

◆ Smooth, structure free surface

◆ Superior adhesion properties and flexibility

◆ With 0.5mm thickness

◆ Double film laminated will not warp and bend-even in high humidity environments.

      Spreading Rate Charts are large size drawdown charts, referred to as display or spreading rate charts, were designed for visual evaluation of hiding powder. The diagonal striped patterns or the checkerboard respectively have a strong visual impact and emphasize variations in film opacity.

In order to calculate the spreading rate ASTM D 344 uses Forms 8H and 10H. In this test the paint is spread uniformly on a defined test area（0.1 square meters～1 square foot）and the spreading rate is calculated from the weight and density of the applied coating.